CAT5E Cassette
Dimensions: 4.75 h x 1.25 w x 6.0 d
Weight: 1 lbs
Copper Ports: 6 X CAT5E Standard or Shielded
Front: 6 X RJ45 CAT5E
Rear: 1 X RJ21 Telco (25-Pair)
"...completely certified and tested to TIA/EIA specifications."
CAT5E Cassette
This Category 5e cassette comes completely certified and tested to TIA/EIA specifications. It has 6 RJ45 ports in the front and one 25-pair Telco connection in the back. Rated to 350MHz, this product is great for both datacom and telecom applications alike.
Technical Specifications
- 6-port Category 5e cassette
- 6 x Category 5e RJ45 jacks in front
- 1 x 25-Pair RJ21 Telco female connection in rear
- Fully tested end-to-end to TIA/EIA standards
- 350MHz bandwidth
- Fits the Chameleon chassis
Typical End-to-End Solution
This solution is intended to go from one Chameleon chassis to the other utilizing 2 cassettes and 1 Telco RJ21 backbone cable. RJ45 patch cables can be used in the front to go to switches, patch panels, servers, modems, etc.
10/100/1000 Gigabit Media Converter
Network Ports: 1x Shielded RJ-45, 10/100/1000Mbps,
Full/half duplex Auto-negotiation,
Auto MDI/MDI-X
1xSFP connector with pre-configured SFP fiber transceiver,
1000Mbps full duplex,
Auto-negotiation,
Far End Fault support
Standards: IEEE 802.3, 802.3u, 802.3ab, 802.3x
Management: Web-Based
"...achieve the advantages of central power, optional power redundancy and network management."
10/100/1000 Media Converter
The KGC-310M is a managed Gigabit Media Converter which features a 10/100/1000M copper port and mini-GBIC (SFP) port.
Technical Specifications
- Tri-speed 10/100/1000Mbps copper to 1000M fiber conversion
- Comply with IEEE 802.3, 802.3u, 802.3ab, 802.3z standard
- Support auto-negotiation with link partners
- Provide SFP on fiber port for mounting a variety of fiber options
- Provide loop back test function with link partner over fiber link
- Provide monitoring function for remote link partner's copper link status
- Support optional Din-Rail installation
- Support center chassis installation to achieve the advantages of central power, optional power redundancy and network management
- Ideal solution for multimode, short reach up to long reach single mode fiber, Bi-Di applications
- Web-based configuration management support
- Port operating mode, flow control and status monitoring functions
- Tagged or untagged packet filtering
- 802.1Q VLAN tag stripping and tagging
- Support Q-in-Q application with double tag capability
- Quality of ervice (QoS) function with 8021.p, DSCP priority classifications
- Supports SNMP trap for port link change
10/100 Switch Cassette
Power: DC In Power: Rating +7.5V min. 1A,
Operating voltage: +6.5V ~ +12.5VDC(Device DC Input)
Consumption: 7 watts. (max.)
Dimension: 144 X 100 X 26 mm
Network Ports: 4 X 10/100BASE-TX (RJ45)
1 X 100BASE-FX (Duplex SC)
Standards: IEEE 802.3, 802.3u, 802.3x, 802.1Q
Management: Web-Based
"...Web-based interface for easy management."
10/100 4-Port Fast Ethernet Switch
This is a smart managed switch. It is easy for a user to configure the setting of each port and VLAN Function by Web management.
Technical Specifications
- Each TP port supports auto-negotiation and auto-MDI/MDI-X detection
- Support full/half-duplex operation for each TP switched port
- Support a variety of fiber connectors such as ST, SC, MT-RJ, VF-45 and LC
- Multimode and sigle mode fiber cables (model dependent)
- Web-based interface for easy management
- Static Ip or DHCP supports for IP configuration
- Port Status and configuration
- VLAN configuration
- Security check for management login